模塊基本信息

General Information for MODULE

介紹

INTRODUCTION

SSOT的模塊是一種便于使用、高亮度、高可靠性的VFD产品。模塊可以提供5x7點陣、9x9點陣、字母、數字等類型的顯示；由于內建了DC/DC轉換電路，所以只需要5伏電源輸入就可以操作；采用內置MCU，CG-ROM等方式，可以實現多種字符的顯示。

SSOT VFD modules have been developed for more convenient usage of high-brightness and high-reliability VFDs.

The Module employs 5x7Dot, 9x9Dot.Alpha-Numeric type VFD as its display devices and requires +5Vde power to operate the module, since the necessary voltage is formed from the DC/DC Converter.

By using the built-in MCU, CG-Rom, various characters can be displayed by ASCII Code input.

特點

Features

l  5伏電源輸入（部分型號提供寬電壓輸入：+5伏~+24伏）

l  +5V power source is needed to operate the module.

(Some modules provide a wide operating voltage: +5Vdc ~ +24Vdc.)

l  單片控制器提供了靈活的數據輸入和編輯模式。

通過TTL電平接口，模塊可以直接連接到主機系統。

l  One chip controller provides the flexible data entry and editing mode.

The module can be directly connected to the host system using TTL level interface.

l  兼備並口和串口通信功能；串口通信時，波特率選擇範圍是300bps到19200bps；通過亮度控制功能可以實現亮度多階調整。

l  Either parallel or serial data input mode can be selected.

In case of serial input, it is possible to choose baud-rate from 300 to 19,200 bps

Brightness can be controlled into several levels by dimming function.

l  歐文和日文字庫可以選擇。

l  Either European or Japanese Katakana font can be switchable selected.

l  提供多達16個字符的自定義字庫。

l  The module has up to 16 User Definable Fonts (UDF).

一般規格

General Specifications

l  電氣規格

l  Electrical Specifications

- 供電電壓：+5伏（部分型號提供寬電壓輸入：+5伏~+24伏）

- Supply Voltage: +5V

(Some modules provide a wide operating voltage: 5V - 24V.)

- 接口信號：TTL電平（部分型號提供RS-232或USB接口）

- interfacing Signal: TTL level

(Some modules are available to interface by using RS-232C or USB.)

l  光學規格

l  Optical Specifications

- 亮度：典型值 700 cd/m² (204 ft-L)

- Luminance: Typical 700 cd/m² (204 ft-L)

- 顔色：藍綠色， 波長：505nm

- Color: Blue - Green. Peak Wave = 505 nm

l  環境規格

l  Environment Specifications

-.操作溫度：-20℃~+70℃

- Operating Temperature: -20℃~+70℃

- 存儲溫度：-40℃~+85℃

- Storage Temperature: -40℃~+85℃

※詳細內容請查閱單獨規格書

※See individual specification for details.

※本目錄裏的描述和規格如有更改，恕不通知

※The descriptions and specifications in this catalogue are subject to change  without prior notice.

圖形類型模塊

Graphic Type VFD Module

l  采用內置專用芯片(單片控制器)，每一個點可以獨立控制。

l  By using the built-in ASIC(One-Chip Controller), you easily operate VFDs by addressing each dot individually.

l  圖形類型模塊集合了VFD顯示技術、驅動技術和接口技術，提供了一個集成化、低成本的产品。

l  Graphic modules combine VF Display technology with driving circuitry and interface circuit in a compact and low cost package.

l  SSOT的全點陣圖形模塊爲您的困難提供了解決方案。

l  SSOT’s full-dot graphic VFD modules offer the solution to your difficulties.

l  圖形類型的模塊幾乎可以顯示所有的信息，包括數字、字符和圖形。

l  Graphic VFD modules can display almost information, including numerals, characters and graphics.

l  圖形類型的模塊應用到衡器、計算器、收銀機、提款機、醫療設備、通訊設備、測量設備和醫院、銀行、車站或建築物的信息板上。

l  Graphic VFD modules are being used for high performance Scales, ECR, POS, ATM, Medical, Communication, Measuring equipment, Elevators and lots of information Boards in Hospitals, Banks, Complexes,Buildings, Stations, etc.

l  點陣數的組成和顯示區域可以靈活組合。

l  Composition of Dot Matrix and Display areas are flexible.

特點

Features

l  高品質顯示和亮度表現

l  High quality of display and luminance

l  采用扁平封裝集成電路驅動器和單片控制器，使模塊产品緊湊、輕量化

l  Compact and light-weight unit by using flat packed display drivers and one-chip VFD controller

l  簡單的結構電路

l  Driving through a simple interface

l  高速8位數據寫入

l  High speed 8bit data write-in capability

l  軟件對亮度可調

l  Luminance adjustment available by software